WAGO

General Purpose Relay DPDT (2 Form C) 24VDC Coil Through Hole

14 Position Terminal Block Plug, Male Pins 0.150" (3.81mm) 180° Free Hanging (In-Line)

Through Hole Metal Film Res 25.5ohms 1% 50PPM

END AND INTERMEDIATE PLATE; 1 MM

5 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole

Mini-WSB marking card - as card - Marked - 1 ...

3 Position Terminal Block Header, Female Sockets 0.300" (7.62mm) 90°, Right Angle Through Hole

1 Position Wire to Board Terminal Block 45° (135°) Angle with Board Through Hole

4 Position Wire to Board Terminal Block 45° (135°) Angle with Board 0.591" (15.00mm) Through Hole

10 Position Terminal Block Plug, Female Sockets 0.197" (5.00mm) 180�° Free Hanging (In-Line)

General Purpose Relay SPDT (1 Form C) 115VAC/DC Coil DIN Rail

4 Position Terminal Block Header, Female Sockets 0.138" (3.50mm) Vertical Through Hole

7 Position Terminal Block Header, Female Sockets 0.295" (7.50mm) 90°, Right Angle Through Hole

Terminal Block Connector 4 Position Feed Through Gray 16-28 AWG

FERRULE; SLEEVE FOR 6 MM / AWG 1

3 Position Terminal Block, Cross Connection Jumper Flat Pins

4 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole

Connector Coupling Kit For DIN Rail Terminal Blocks

Terminal Block Connector 4 Position Feed Through Orange 14-22 AWG

8 Position Terminal Block Header, Female Sockets 0.197" (5.00mm) 90°, Right Angle Through Hole

11 Position Wire to Board Terminal Block Horizontal with Board 0.492" (12.50mm) Through Hole

Spare inside blade - for 206-1403 cable knife

Screws&Fasteners KEYHEXAGON SOCKET

—

Terminal Block Connector 3 Position Feed Through Orange 12-18 AWG

3 Position Terminal Block Plug, Male Pins 0.300" (7.62mm) 180° Free Hanging (In-Line)

TOPJOB S end/intermediate plate - for 2002-14xx

2 Position Wire to Board Terminal Block 45° (135°) Angle with Board 0.197" (5.00mm) Through Hole

2 Position Terminal Block, Cross Connection Jumper Flat Pins

Terminal Block Connector 4 Position Feed Through Gray 12-22 AWG

4 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole

Combination Line Connector 3 Contact(s) Female

16 Position Terminal Block Plug, Female Sockets 0.197" (5.00mm) 270�° Free Hanging (In-Line)

4 Position Wire to Board Terminal Block Vertical with Board 0.138" (3.50mm) Through Hole

2 Position Terminal Block, Cross Connection Jumper Flat Pins

5 Position Terminal Block, Cross Connection Jumper Flat Pins

24 Position Wire to Board Terminal Block 30° (150°) Angle with Board 0.098" (2.50mm) Through Hole

3 Position Wire to Board Terminal Block Horizontal with Board 0.492" (12.50mm) Through Hole

18 Position Terminal Block Plug, Female Sockets 0.138" (3.50mm) 180° Free Hanging (In-Line)

END AND INTERMEDIATE PLATE; 1 MM

Terminal Block Connector 2 Position Disconnect Gray 8-20 AWG

3 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.295" (7.50mm) Vertical Through Hole

Wire Marker Carrier, Slip-On 0.91" L (23.0mm) Transparent Polyvinylchloride (PVC)

Compact splicing connector - 2-conductor - Operat

10 Position Terminal Block Plug, Male Pins 0.150" (3.81mm) 180° Free Hanging (In-Line)

Circular Connector Standard 4/4 Female Sockets/Male Pins Panel Mount

2 Position Terminal Block Header, Female Sockets 0.173" (4.40mm) 90°, Right Angle Through Hole

END AND INTERMEDIATE PLATE; 1 MM

STEP-DOWN COVER PLATE; 1 MM THIC

8 Position Terminal Block Header, Female Sockets 0.197" (5.00mm) 90°, Right Angle Through Hole

3 Position Terminal Block Plug, Male Pins 0.173" (4.40mm) 180�° Panel Mount, Snap-In

10 Position Terminal Block Header, Female Sockets 0.138" (3.50mm) 90°, Right Angle Through Hole

4 Position Terminal Block Header, Female Sockets 0.150" (3.81mm) 90°, Right Angle Through Hole

3 Position Terminal Block, Cross Connection Jumper Flat Pins

7 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole

8 Position Wire to Board Terminal Block Horizontal with Board 0.295" (7.50mm) Through Hole

1 Position Terminal Block Plug, Female Sockets 0.197" (5.00mm) 180° Free Hanging (In-Line)

Connector Label, Snap In For 5mm Wide Terminal Blocks

PUSH-IN TYPE JUMPER BAR; INSULAT

Connector Separator For DIN Rail Terminal Blocks

12 Position Terminal Block Header, Female Sockets 0.197" (5.00mm) Vertical Through Hole

Connector Label, Snap In For 4mm Wide Terminal Blocks

—

7 Position Wire to Board Terminal Block 30° (150°) Angle with Board 0.100" (2.54mm) Through Hole

—

Sensor/Actuator cable - M8 socket - angled - M12A

7 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.197" (5.00mm) Vertical Through Hole

Terminal Block Connector 3 Position Ground, Earth White 12-28 AWG

2 Position Terminal Block, Cross Connection Jumper Flat Pins

7 Position Wire to Board Terminal Block Horizontal with Board 0.492" (12.50mm) Through Hole

6 Position Wire to Board Terminal Block Horizontal with Board 0.394" (10.00mm) Through Hole

7 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.138" (3.50mm) 90°, Right Angle Through Hole

8 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.138" (3.50mm) 90°, Right Angle Through Hole

TERM BLOCK HDR 2POS 5MM

2 Position Terminal Block Plug, Female Sockets 0.138" (3.50mm) 180° Panel Mount

VDE-Torx -Schraubendreher T8 VDE-gepr ft gr

12 Position Wire to Board Terminal Block Horizontal with Board 0.492" (12.50mm) Through Hole

TERM BLOCK PLUG 4POS 3.50MM

Terminal Block Connector 2 Position Ground, Earth White 8-20 AWG

Connector Separator For DIN Rail Terminal Blocks

VDE-Schlitzschraubendreher 3 0 x 0 5 x 100 VDE-ge

8 Position Wire to Board Terminal Block Horizontal with Board 0.492" (12.50mm) Through Hole

9 Position Wire to Board Terminal Block Horizontal with Board 0.492" (12.50mm) Through Hole

VDE-Kreuzschlitz-Schraubendreher PZ0 x 60 VDE-gep

7 Position Terminal Block Plug, Female Sockets 0.138" (3.50mm) 180° Free Hanging (In-Line)

2 Position Terminal Block Plug, Male Pins 0.200" (5.08mm) 180° Free Hanging (In-Line)

Connector Fixing Element For DIN Rail Terminal Blocks

8 Position Wire to Board Terminal Block Horizontal with Board 0.492" (12.50mm) Through Hole

12 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole

Screwless end stop - 6 mm wide - for DIN-rail 35

Sensor/Actuator cable - M12A socket - angled - M8

2 Position Terminal Block, Cross Connection Jumper Flat Pins

Terminal Block Connector 4 Position Feed Through Gray 16-24 AWG

END AND INTERMEDIATE PLATE; 1 MM

3 Position Wire to Board Terminal Block Vertical with Board 0.394" (10.00mm) Through Hole

5 Position Terminal Block Plug, Male Pins 180° Free Hanging (In-Line)

Transformer terminal block - 6-pole - CAGE CLAMP

Terminal Block Connector 16 Position Feed Through Gray 16-28 AWG

Fitted pluggable connector - 5-pole - M12 plug s

5 Position Terminal Block Plug, Male Pins 0.394" (10.00mm) 180° Panel Mount