The NCV78723MW2R2G is an automotive-grade quad LED display driver from Onsemi. It operates within a temperature range of -40°C to 150°C and is packaged in a 24-terminal QFNW-24 package. The device is designed to drive LED displays and has a nominal supply voltage of 3.3V, with a minimum and maximum supply voltage of 3.05V and 3.6V, respectively. The driver has a maximum supply current of 6mA.
Multilayer Ceramic Capacitor, 100nF capacitance, 25V DC rated voltage, and 5% tolerance. Features C0G dielectric for stable performance across a wide temperature range from -55°C to 200°C. Housed in a 1206 (3216 metric) surface mount package with a low dissipation factor of 0.1%. Designed for high-temperature applications with extreme low ESR and RoHS compliance.
Automotive CAN controller IC, half-duplex, supporting 100Kbps data rates. Features include shutdown, sleep, and standby modes with a wide operating supply voltage range from 5V to 27V, nominal 24V. This 8-pin SOIC package component operates from -40°C to 150°C, is RoHS and Halogen Free compliant, and offers a maximum supply current of 8mA.
Illuminated rocker switch featuring SPST (Single Pole Single Throw) functionality for On-Off control. Rated for 20A at 125V AC, with a maximum AC voltage rating of 250V. Constructed with a black nylon actuator and polycarbonate body, it offers a 2-position, straight orientation with quick connect termination. Designed for panel mounting with a snap-in mechanism, this switch boasts an electrical life of 6,000 cycles and a mechanical life of 100,000 cycles, operating within a temperature range of -20°C to 85°C. Approvals include UL, CSA, and VDE, with RoHS compliance.
Shielded, right-angle, female modular connector with 8 contacts and 8 loaded positions. Features gold-plated bronze and brass contacts, a 1.5A current rating, and a 150V voltage rating. Designed for through-hole mounting with solder terminals and a locking mechanism. Operates within a temperature range of -40°C to 85°C, with a UL94 V-0 flammability rating.
Dual SPST switches, normally open, offering <1 Ω on-state resistance. Operates from a 1.8 V to 5.5 V single supply voltage. Features a 24 MHz -3dB bandwidth and a low power dissipation of 5 µW. Packaged in MSOP with parallel interface and available on tape and reel. Suitable for applications requiring low voltage operation and high switching speeds.
Buck-Boost DC-DC controller with a fixed 5V output voltage, capable of delivering up to 3A. Features a wide input voltage range from 7V to 40V, with a maximum operating supply voltage of 40V and a DC rated voltage of 80V. Operates with a switching frequency of 52kHz and achieves 77% efficiency. Packaged in a TO-220-5 through-hole mount, this RoHS compliant component offers a 1.5A current rating and operates across a temperature range of -40°C to 125°C.
The NCV8502D50R2G is a single output linear voltage regulator with an output voltage of 5V and a maximum output current of 150mA. It is packaged in a SOIC package and is suitable for surface mount applications. The device has a dropout voltage of 400mV and an input bias current of 90uA. It operates over a temperature range of -40°C to 150°C and is compliant with RoHS regulations.
The NCP59800BMNADJTBG is an adjustable linear voltage regulator from Onsemi. It features 8 terminals in a dual terminal position and is packaged in an HVSON-8 package. The device has a maximum output voltage of 5V and a maximum output current of 1A. It operates over a temperature range of -40°C to 125°C and has a dropout voltage of up to 0.5V. The regulator is adjustable and suitable for use in power management applications.
N-Channel Power MOSFET featuring 600V drain-source breakdown voltage and 11A continuous drain current. This SUPERFET® FRFET® device offers a low 380mΩ maximum drain-source on-resistance. Designed for through-hole mounting in a TO-220AB package, it boasts a maximum power dissipation of 125W and operates within a temperature range of -55°C to 150°C. Key switching characteristics include a 34ns turn-on delay and 56ns fall time.
8-bit serial-to-parallel shift register, CMOS technology, operating from a 2V to 6V supply range. Features 2 input lines and 8 output lines, with a propagation delay of 27ns. Housed in a 14-pin SOIC surface-mount package, this unidirectional device offers a wide operating temperature range of -55°C to 125°C. RoHS compliant and halogen-free.
Differential driver/receiver IC featuring a 4GHz gain bandwidth product. This surface mount component operates with a dual supply voltage up to 6V and a single supply voltage range of 2.375V to 3.8V. It includes one receiver and one transmitter, functioning as a bus transceiver. The component is housed in a halogen-free, lead-free TSSOP package measuring 3.1mm x 3.1mm x 0.95mm, suitable for operation between -40°C and 85°C.
Unshrouded header with 8 positions and 2 rows, featuring a 2.54mm pitch. Male pin contacts are made of bronze with gold plating for mating, offering a 7.6A max current rating and 550V max AC voltage rating. The straight, top-entry, thru-hole termination is designed for solder connection. Insulation material is polymer with a natural color, and the housing is also natural. Operating temperature range is -55°C to 125°C, with a UL94 V-0 flammability rating.
Quad JFET-input operational amplifier, featuring a 3MHz gain bandwidth product and 13V/µs slew rate. This surface mount device offers a 70dB common mode rejection ratio and 100dB voltage gain, with a low 200pA input bias current. Operating from a 3.5V to 18V dual supply, it functions across a 0°C to 70°C temperature range. Packaged in a 14-SOIC for tape and reel distribution.
The MM74HCT08M is a 14-pin SOIC N lead-frame SMT logic AND gate IC from Onsemi, featuring a small outline IC narrow body package with gull-wing leads. It operates over a temperature range of -40 to 85 degrees Celsius and is designed for surface mount applications. The device is constructed using CMOS process technology and has a seated plane height of 1.75mm maximum. It is a member of the HCT logic family and is available in a 14-pin package with a 1.27mm pin pitch.
High-speed dual-channel optocoupler in SOP package, featuring 1Mbps data rate and 2.5kV isolation voltage. Delivers 27% current transfer ratio with 8mA maximum collector current per channel. Designed for surface mounting with a 450ns propagation delay and 0.8us fall time. Operates across a -40°C to 85°C temperature range, with 100mW power dissipation. This RoHS compliant component is supplied in a 3000-piece rail/tube.
The FFSP0865A is a single-element rectifier diode with a maximum operating temperature of 175 degrees Celsius and a minimum operating temperature of -55 degrees Celsius. It features a TO-220AC package and is constructed with silicon carbide material. The diode has a maximum reverse voltage of 650V and a maximum power dissipation of 98mW.
8-bit parallel-load shift register, CMOS technology, operating from 2V to 6V with a typical 5V supply. Features unidirectional data flow, push-pull output, and a propagation delay of 26ns. This surface-mount SOIC package integrates a single circuit with 8 bits per element, suitable for a wide temperature range of -40°C to 85°C. RoHS compliant and lead-free.
Multilayer Ceramic Capacitor (MLCC) with 100nF capacitance and 50V DC rating. Features X7R dielectric for stable performance across a -55°C to 125°C operating temperature range. Surface mountable in an 0805 (2012 metric) package with 10% tolerance. Packaged on tape and reel for automated assembly.
Surface mount fixed inductor with 3.8µH inductance and 10% tolerance, tested at 100kHz. Features a ferrite core, 1.54A maximum DC current rating, and 0.065 Ohm DC resistance. Operates within a -40°C to 105°C temperature range and is supplied in tape and reel packaging.
500mW Zener Diode with a 2.7V DC rated voltage and 5% voltage tolerance. Features a DO-35 through-hole package with tin, matte contact plating. Operates across a wide temperature range from -65°C to 200°C, with a maximum reverse leakage current of 75uA. This RoHS compliant component offers a Zener voltage of 2.7V and a Zener current of 5mA.
8-position, 2-row socket strip with 2.54mm pitch. Features tin-plated bronze fork-shaped contacts and a black polymer housing. Designed for through-hole mounting with a right-angle side entry termination. Rated for 550V AC, operating temperature range of -55°C to 105°C, and UL94 V-0 flammability. Lead-free and RoHS compliant.
The SN75ALS194DR is a 4-channel bus transceiver from Texas Instruments, operating at a maximum data rate of 20Mbps. It is designed to function within a supply voltage range of 4.75V to 5.25V, with a maximum operating temperature of 70°C and a minimum of 0°C. This device is available in a lead-free package and is RoHS compliant. The transceiver is packaged in a SOP-16 package and is available on a tape and reel. It is not radiation hardened.
Aluminum electrolytic capacitor, 100µF capacitance, 25V voltage rating. Features 20% tolerance, 180mΩ ESR, and 500mA ripple current. Operates from -55°C to 105°C with a 2000-hour lifespan. Surface mount package with 8mm diameter and 6.2mm height, supplied on tape and reel.
Dual logarithmic digital potentiometer with 64 positions and 65 taps, offering a 45kΩ resistance with 20% tolerance. Features a serial I2C control interface and operates from a 2.7V to 5.5V supply voltage. Housed in a 14-pin TSSOP package with dimensions of 5mm (L) x 4.4mm (W) x 0.9mm (H). Suitable for operation between -40°C and 85°C with a typical supply current of 40µA.
2 Mbit serial I²C bus EEPROM featuring 256K x 8 organization. This surface mount device operates with a 1MHz maximum frequency and a 2-wire serial interface. It offers a wide supply voltage range from 1.8V to 5.5V, with a maximum access time of 450ns. The component is RoHS compliant and lead-free, packaged in a SO case with dimensions of 5mm length, 4mm width, and 1.25mm height.
100µF, 25V aluminum electrolytic capacitor with 20% tolerance. Features a 145mA ripple current rating and a 2000-hour life at 85°C. Surface mountable, cylindrical construction with 8mm diameter and 6.2mm height. Designed for standard applications, packaged in tape and reel.
Quad JFET operational amplifier featuring low 200pA input bias current and a 16V/µs slew rate. This surface mount device offers a 4MHz bandwidth and 40mA output current per channel, operating from dual supplies up to ±18V. With a 70dB common mode rejection ratio and 10mV input offset voltage, it is suitable for a wide range of analog signal processing applications. The component is RoHS compliant and packaged in a SOIC case.
Automotive-grade linear voltage regulator, providing a fixed 3.3V output with 400mA maximum output current and 2% accuracy. Features a low dropout voltage of 1.27V, a wide input voltage range from 4.5V to 40V, and operates across a temperature range of -40°C to 150°C. Packaged in a surface-mount DPAK (TO-252) for efficient thermal management. This RoHS-compliant component is supplied on tape and reel.
Triple 3-input positive-NOR logic gate IC, CMOS technology, operating from 2V to 6V with a typical 5V supply. Features 3 independent NOR gates, each with 3 inputs and 1 output. Offers a high level output current of -5.2mA and a low level output current of 5.2mA, with a maximum output current of 25mA. Operates across a temperature range of -40°C to 85°C, with propagation delays around 20ns. Packaged in a 14-pin SOIC surface-mount case, this RoHS compliant component is supplied on tape and reel.
Radial film capacitor with 91nF capacitance and 5% tolerance. Features a 1kV DC rated voltage and 350V AC rated voltage. Constructed with PP dielectric material, offering a -55°C to 105°C operating temperature range. Through-hole mounting with a 22.5mm lead pitch and 0.8mm lead diameter. Dimensions are 26mm (length) x 8.5mm (width/depth) x 18mm (height).
100µF, 16V polarized aluminum electrolytic capacitor with 20% tolerance. Features a 6.3mm diameter, 5.4mm height, and 2.2mm lead pitch, designed for surface mount applications. Offers a dissipation factor of 0.2%, leakage current of 3µA, and ripple current of 60mA. Operates across a temperature range of -55°C to 105°C with a rated life of 1000 hours. RoHS compliant and packaged in tape and reel.
This ceramic capacitor from Kyocera features a capacitance of 2pF and a voltage rating of 50V. It is constructed with a C0G dielectric and has a package size of 0805. The component is designed for surface mount applications and has a maximum operating temperature of 125°C and a minimum operating temperature of -55°C. It is lead-free and RoHS compliant.
Dual general-purpose comparator IC featuring low input offset voltage of 5mV and 1.3µs response time. Operates with a wide supply voltage range from 1V to 36V, with a nominal 18V. This bipolar technology component offers 2 channels, 16mA output current, and a 570mW power dissipation. Packaged in a narrow SOIC-8, it is halogen-free, lead-free, and RoHS compliant, supplied in a 2500-piece tape and reel.
Dual 4-input NAND gate IC featuring CMOS technology and TTL output. This surface mount component operates from a 2V to 6V supply voltage, with a typical operating voltage of 5V. It offers a propagation delay of 7ns and a low quiescent current of 4uA. The SOIC package is halogen-free and lead-free, with dimensions of 8.75mm length, 4mm width, and 1.5mm height.
Surface mount fixed resistor featuring metal glaze/thick film technology. 1000 ohm resistance with a 1% tolerance. Rated for 0.125W power and 150V maximum operating voltage. Operating temperature range from -55°C to 155°C. 2-terminal configuration in an 0805 package.
Single-channel, 8-pin SOIC optocoupler featuring a phototransistor output. Achieves a 1Mbps data rate with a 2.5kV isolation voltage. Offers a 27% current transfer ratio, 8mA maximum collector current, and 20V maximum output voltage. Designed for surface mount applications with a 100mW power dissipation.
Quad SPST CMOS switch featuring 2.5Ω on-resistance and a 200MHz bandwidth. This surface-mount integrated circuit operates from 1.8V to 5.5V, with a low supply current of 1µA. It offers 4 channels with parallel interface and a maximum power dissipation of 430mW. The TSSOP package ensures compact integration.
The Kyocera 046277006001883+ is a surface mount FFC/FPC connector with a right angle body orientation and 6 SKT contacts. It has a terminal pitch of 0.5mm and is rated for 50VDC/50VAC and 0.4A. The connector has a product length of 4.5mm, depth of 3.5mm, and height of 0.9mm. It operates between -20°C and 85°C.
Dual D-type flip-flop IC, featuring positive edge clock triggering and non-inverting polarity. Operates with a supply voltage range of 2V to 6V, typically 5V, and supports frequencies up to 60MHz. This surface-mount component is housed in a 14-pin SOIC package, offering 2 elements with 1 bit per element. Key specifications include a propagation delay of 15ns and output currents of 5.2mA (low) and -5.2mA (high). RoHS compliant and designed for a wide operating temperature range of -40°C to 85°C.
Showing 1–50 of 3,413 (page 1 of 69)